Tensile Umbrellas

Tensile Square Umbrella 13 feet Diagonal

                                                                         

                                                                                

                                                  

                    Dimensions :

                                         xz↔y=3.11 feet                                        A↔B= 9.3 feet

                                        xz↔w=6 feet                                         E↔F=9.8 feet                                                                                                       A↔D=13.2 feet

Center pipe =1 ½ inch Stainless Steel round pipe

Side wing=  1½x 1½ Stainless Steel round  pipe

Color = off white

 

What differentiates the tensile umbrella from the regular umbrellas is the shape .The regular umbrella is either pyramid shaped or concave shaped where as the tensile umbrella is convex .The shape is created using the strength of the fabric

Materials

Fabric: PVC 580 to 760 gsm

Cable: steel  wire ropes running through the fabric connecting the outer edge of the arm pipes   

·         Corner plate’s stainless steel cut to fabric shape with bolts connecting the fabric to the outer arm.

·         Pipes used are all stainless steel to make it rust -proof and shining forever.

Components are aluminum grade LM6. Powder coated

 

Tensile Hex Giant Umbrella 15&20 feet Dia

                                              

                                                            

           

Center pipe =3 to 4  inch  M.S or Stainless steel round pipe

Side wing 2 inch M.S or Stainless steel round pipe

Painting colour of choice

 

The structure is minimized and known for its exceptional strength and durability. With a variety of modular units from 15feet Dia upwards, Tensile Umbrella is both stylish and practical. Providing shelter and protection, it is ideal for areas where year round cover is desirable .The umbrella is more of a permanent installation in nature. These umbrellas are huge and have to with stand the weather conditions so the fixing has to be permanent on the ground.

The umbrella structure consists of fabric supported by cables and steel pipes. The membranes are supported at the perimeter by edge cables.
The edge cables are fixed to the end of the arms, and the arms are fixed to the column at the center and stabilized / braced by strut.

Materials

  • Fabric: PVC 580 tp 760 gsm
  • Cable: 5mm steel  wire ropes running through the fabric connecting the outer edge of the arm pipes   
  • Corner plates are M.S 2.5 mm thick fabricated to fabric shape and powder coated the bolts connect the fabric to the outer arm.
  • Pipes used are all of Mild steel. To make it rust –proof powder coating is done.
  • Components are aluminum grade LM6. Powder coated.

                                                                PHOTO GALLERY..........